V-PRO Pull Screws 5.5 x 48 mm (10 pcs)

V-PRO Pull Screws 5.5 x 48 mm – 10 Pieces

V-PRO pull screws are self-tapping screws for extracting cylinder cores. They are used in combination with cylinder pullers such as the Multipick Glocke or QA Pro 2.

Function

You drive the screw into the cylinder front. The screw bores through the material without pre-drilling. The thread locks into the cylinder. You then attach the screw to the cylinder puller and extract the core from the lock.

SIT 20 Bit Drive

The screw features a SIT 20 bit drive, compatible with Torx 20 bits. You can drive the screw in by hand without a bit adapter. The bit stays seated in the profile during turning.

Drill Point and Thread

The screw has a self-tapping drill point. The thread geometry is optimized for cylinder materials. The 48 mm length provides grip in various cylinder profiles.

DELTA SEAL Coating

The screw has a DELTA SEAL sliding coating that reduces friction during driving. Each screw size has its own color coding. The coating also provides corrosion protection. No additional lubricant is needed — lubricant can cause metal shavings to clump.

Specifications

• Diameter: 5.5 mm
• Length: 48 mm
• Drive: SIT 20 (Torx 20 compatible)
• Material: hardened steel
• Coating: DELTA SEAL with color coding
• Type: self-tapping, no pre-drilling required

Package Contents

• 10 V-PRO pull screws 5.5 x 48 mm
• 1 SIT20 quality bit

Technical Data

• Reusable: multiple times
• Manufactured in Germany
• Manufacturer: Multipick Direct GmbH