Lock broken? With proper care, you can use your cylinder again without any problems.

Use ABUS’ PS88 lock spray every now and then to keep the lock working lubricated.

In addition, you can use the tips below for caring for your lock cylinder to ensure it continues to close without a hitch:

1. Never force the installation of a door cylinder!
2. For security reasons, ensure that the cylinder does not protrude more than 3 mm outside the door (according to DIN).
Use especially burglar-resistant locking plates.
3. Lock and unlock only with an undamaged key.
4. Make sure to always press the key until it hits the lap.
5. Never turn the key by force.
6. Open the door with the door handle and not by pulling the turned key.
7. Do not leave the key permanently in the lock; this will cause tension on the cylinder.
8. perform cylinder maintenance from time to time with ABUS Maintenance Spray PS88.
9. never use oil to lubricate the lock!