Sparrows ABUS Padlock ByPass Driver

The Sparrows ABUS Padlock ByPass Driver is designed to bypass the very popular ABUS 72/40 padlocks. This ABUS model is so popular that it is often copied and duplicated by other manufacturers.

This development makes the ABUS ByPass Driver even more effective, as the Driver can also open these cloned designs.

This Bypass Driver works because the lock does not have an effective plate (wafer) to keep the tool from the internal mechanism of the lock.
The Driver slides through the keyhole and with a small movement it can open the bracket, just like you would with a key!
To use the Bypass Driver effectively, enter the wave-like head with the tip up through the keyhole. Glide the tip along the bottom of all the pins all the way to the back of the lock.
At the rear of the lock, move the Driver head into position. Gently brings the driver a little deeper into the lock by carefully wiggling it back and forth – by just a few degrees.
When it is brought into the right position, you can turn the handle and open the lock.

On this page I have written an explanation on how to use the ABUS Driver on European ABUS 72/40 padlocks.

ABUS’ keyhole is very narrow, so the Driver is made very thin. Proper technique is therefore important to prevent damage to the tool.

The Sparrows Bypass Driver is made of steel that is smoothly polished and features a thermo plastic handle. Like all of Sparrows’ tools, the Driver is a tool for professional use.